Cisco 300-425 Dumps PDF

Master Your Preparation for the Cisco 300-425

We give our customers with the finest 300-425 preparation material available in the form of pdf .Cisco 300-425 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 300-425 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.

Friendly Support Available 24/7:

If you face issues with our Cisco 300-425 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 300-425 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.

Verified and approved Dumps for Cisco 300-425:

Our team of IT experts delivers the most accurate and reliable 300-425 dumps for your Cisco 300-425 exam. All the study material is approved and verified by our team regarding Cisco 300-425 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 300-425 exam. This top-tier resource, consisting of 300-425 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 300-425 dumps are the best and have been thoroughly approved by our experts.

Cisco 300-425 Questions:

Embark on your certification journey with confidence as we are providing most reliable 300-425 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 300-425 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 300-425 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 300-425 exam questions answers to be your reliable companion for acing the 300-425 certification.

Related Exams

Cisco 300-425 Sample Questions

Question # 1

A wireless engineer must design mobility between two buildings at a campus site. The engineer has one controller at each site. The engineer is investigating inter-controller CAPWAP data and control traffic. Which two ports must be open? (Choose two.)

A. 5246  
B. 5247  
C. 8443  
D. 16666  
E. 16667  

Show Answer

Question # 2

An engineer is configuring a centralized set of controllers for separate facilities. Which two Cisco wireless architectures must be used to ensure flexible sizing of WLAN to VLAN mappings? (Choose two.) 

A. interface group  
B. mobility group  
C. AP group  
D. controller group  
E. RF group  

Show Answer

Question # 3

The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two settings accomplish this goal? (Choose two.) 

A. Configure mobility groups between WLCs.  
B. Use Cisco Centralized Key Management for authentication.  
C. Configure AP groups between WLCs.  
D. Configure AVC profile on new SSID.  
E. Use AVC to tag traffic voice traffic as best effort.  

Show Answer

Question # 4

During a wireless network design, a customer requires wireless coverage on the perimeter of a building but also wants to minimize signal leakage from the wireless network. Which antenna should be used to accomplish this design?

A. Patch  
B. Dipole  
C. Monopole  
D. Omnidirectional  

Show Answer

Question # 5

An engineer is designing a wireless network to support high availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover Which two requirements need to be incorporated into the design to meet these needs? (Choose two.) 

A. redundant WLC  
B. controller high availability pair with one of the WLCs having a valid AP count license 
C. 10 sec RTT  
D. back-to-back direct connection between WLCs  
E. WLC 7.5 code or more recent  

Show Answer

Question # 6

During a wireless design all APs are mapped to designated controllers in case of a failure. The controllers are located in the same data center but in different racks. An AP failed over to a controller that was not defined on its High Availability tab. The customer does not want the AP to move back to its defined Cisco WLCs until they manually intervene. What needs to be addressed in the design? 

A. Set AP fallback to enabled.  
B. Set AP fallback to disabled.  
C. Change the HA SKU secondary unit option.  
D. Change the default mobility domain.  

Show Answer

Question # 7

An engineer must repurpose a lab WLC appliance for use in the production environment of the enterprise. After the new WLC is configured with the information of the other WLC, the mobility tunnels are still not coming up. What is the reason?

A. A firewall is blocking UDP port 16667 between the WLCs.  
B. The WLC management interfaces are in the same VLAN.  
C. The hardware platform is incompatible.  
D. The mobility groups are different.  

Show Answer

Question # 8

A customer requires that two wireless APs be installed in a reception area, in a historic building, the impact of the APs on the appearance of the reception area must be minimized. Which two AP antennas should be used? (Choose two.) 

A. AP with a Yagi antenna  
B. AP with a patch antenna  
C. AP with a monopole antenna  
D. AP with an integrated antenna  
E. AP with a dipole antenna  

Show Answer

Question # 9

A customer is looking for a network design with Cisco Hyperloctation using AP4800 for location tracking via a custom mobile app Issues appeared in the past with refresh rates for location updates. What needs to be implemented to meet these requirements?

A. Cisco CMX SDK in the location app  
B. redundant CMX and fetch location in round-robin fashion.  
C. device Bluetooth via the app  
D. Cisco FastLocate technology  

Show Answer

Question # 10

A network engineer is working on a predictive WLAN design, the new wireless network must support access to Internet, email, voice, and the inventory database, to successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?

A. signal strength of -67 dBm, 25-dB SNR, and maximum 1 percent packet loss.  
B. signal strength of -67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.  
C. signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.  
D. signal strength of-70 dBm,30-dB SNR. and maximum 10 percent packet loss.  

Show Answer

Question # 11

WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active. Which design side case explains the issue? 

A. The secondary WLC platform does not support the required client count.  
B. The WLCs had not completed database sync before the primary failure.  
C. SSO is not configured correctly.  
D. Some client sessions were in WebAuth-Req state before failover.  

Show Answer

Question # 12

How does AP failover priority for access points function when configured with priority 1 or 4?

A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure. 
B. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure. 
C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure. 
D. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure. 

Show Answer

Question # 13

An enterprise is using the wireless network as the main network connection for corporate users and guests. To wireless network availability. Two Standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but faits. Which protocol needs to be allowed between the networks that the controllers are installed? 

A. IP Protocol 67  
B. IP Protocol 77  
C. IP Protocol 87  
D. IP Protocol 97  

Show Answer